Upgrades and Patches

BioWin Patch : 5.3.0.1210 (January 2018)

The patch released today (BioWin 5.3.0.1210) addresses the following issues : Increased precision for switching interval in Flow Router specification. Maximum/minimum air flow rate can be set in GSST element. You can update using the automatic updater or by downloading the latest version here : BioWin Update

BioWin Patch : 5.2.0.1163 and PetWin Patch : 5.2.0.606 (June 2017)

The patches released today (BioWin 5.2.0.1163 and PetWin 5.2.0.606) address the following issues : Percent capture of ISS in Grit tank element correctly updates on exiting dialog. Adjusted scaling of two-sided hydraulic loading factor switch in Trickling filter element. Improved accounting of power used by Brush/Surface aerator elements in total power calculation. Adjusted parameter used …

BioWin Patch : 5.2.0.1163 and PetWin Patch : 5.2.0.606 (June 2017) Read More »

BioWin Patch : 5.2.0.1162 (April 2017)

The patch released today (BioWin 5.2.0.1162) fixes an issue related to volume limits in equalization tank elements, and improves DO / airflow modeling in trickling filter elements. You can update using the automatic updater or by downloading the latest version here : BioWin Update

BioWin Patch : 5.2.0.1159 (March 2017)

The patch released today (BioWin 5.2.0.1159) fixes an error when editing old style PST elements, and fixes incorrect units for volumetric cost in sludge element. You can update using BioWin’s automatic updater or by downloading the latest version here. You can update using the automatic updater or by downloading the latest version here : BioWin Update    

BioWin Patch : 5.2.0.1157 (February 2017)

A small issue where a portion of the Operation tab of the Ideal Primary Settling Tank was not displaying properly has been fixed by a patch released today (BioWin 5.2.0.1157). You can update using the automatic updater or by downloading the latest version here : BioWin Update

BioWin Patch : 4.1.1.1054 (May 2016)

Please note that a patch for BioWin 4.1 has been recently released. The current release version of BioWin 4.1 is 4.1.1.1054. You can download that here. Also please note that BioWin 5.0 was released in February 2016. If you wish to upgrade BioWin 4.1 to BioWin 5.0, you may do that here.  

BioWin Patch : 5.0.0.1110 (May 2016)

A BioWin 5 patch was recently released – all of our users who are unable to use BioWin’s auto-update feature should visit www.envirosim.com/upgrading-to-biowin-50 to download. The most recent version of BioWin is 5.0.0.1110, which you can check in BioWin by selecting Help > About…