BioWin Patch : 6.0.22.1827 (August 2019)

BioWin Update

The patch released today (BioWin 6.0.22.1827) addresses the following issues :

  • an issue with the plug flow channel element volume calculation
  • an issue with the P fractions displayed in the View Results section of the Influent Specifier
  • an issue with exported album charts in Excel Reports having duplicate series names
  • an issue where the velocity gradient for surface aerated reactors was not displayed in the fly-by window
  • other minor formatting fixes

You can update using the automatic updater or by downloading the latest version here : BioWin Update


BioWin Patch : 5.3.0.1214 (December 2018)

BioWin Update

The patch released today (BioWin 5.3.0.1214) addresses the following issues :

  • Fixed an issue where custom air supply groups (used in energy cost calculations) were not saved.
  • Improved speed of simulation when controlling air flow via the BW Controller.
  • Updated cabinet configurations: IFAS Simplified and IFAS Detailed.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1213 (November 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1213) addresses the following issues :

  • Fixed an issue for files created in older versions of BioWin where an airflow constraint specified in a media bioreactor’s Operation tab may not be obeyed.
  • Updated cabinet configurations: MLE Process, 3 Stage Phoredox, and 3 Stage Phoredox with Primary Fermenter.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1212 (June 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1212) addresses the following issues :

  • Improved seeding in PST element.
  • Minor fix to buttons that reset diffuser parameters to default values.
  • Fix error when pasting the clipboard to a state variable vector in various dialogs.
  • Change in SOTE calculation when media occupies a very large percent of total volume.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1211 (March 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1211) addresses the following issues :

  • Steady state tables in the Album only update during simulation when “Steady state simulation table updates” is checked in Customize.
  • Spanish, Japanese, and Chinese language support added.
  • Updated several BW Controller examples to simulate quicker.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1210 (January 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1210) addresses the following issues :

  • Increased precision for switching interval in Flow Router specification.
  • Maximum/minimum air flow rate can be set in GSST element.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1209 (January 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1209) addresses the following issues :

  • The default values on the GSST Granules tab for granule settled volume and voidage have been modified slightly.
  • When a new GSST element is added to the drawing board, it uses the global default parameters as the basis for its local parameters rather than the current global project parameters.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.2.0.1163 and PetWin Patch : 5.2.0.606 (June 2017)

    The patches released today (BioWin 5.2.0.1163 and PetWin 5.2.0.606) address the following issues :

  • Percent capture of ISS in Grit tank element correctly updates on exiting dialog.
  • Adjusted scaling of two-sided hydraulic loading factor switch in Trickling filter element.
  • Improved accounting of power used by Brush/Surface aerator elements in total power calculation.
  • Adjusted parameter used in calculation of mixed liquor density. [Project | Parameters | Physical/Chemical][A in ML Density = H2O density + A*MLSS]
  • You can update using the automatic updater or by downloading the latest versions here :


    BioWin Patch : 5.2.0.1162 (April 2017)

    The patch released today (BioWin 5.2.0.1162) fixes an issue related to volume limits in equalization tank elements, and improves DO / airflow modeling in trickling filter elements.

    You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.2.0.1159 (March 2017)

    The patch released today (BioWin 5.2.0.1159) fixes an error when editing old style PST elements, and fixes incorrect units for volumetric cost in sludge element. You can update using BioWin’s automatic updater or by downloading the latest version here.

    You can update using the automatic updater or by downloading the latest version here : BioWin Update

     

     


    BioWin Patch : 5.2.0.1157 (February 2017)

    A small issue where a portion of the Operation tab of the Ideal Primary Settling Tank was not displaying properly has been fixed by a patch released today (BioWin 5.2.0.1157).

    You can update using the automatic updater or by downloading the latest version here : BioWin Update


    Graphical Issues Following Microsoft Update

    A few days ago, Microsoft released a patch that seems to be causing graphics issues for some users. The graphical issues may manifest as “black bands” that appear when you click on white space in BioWin’s drawing board as shown in the screen capture below.

    We are investigating this,

    [read more…]


    BioWin Patch : 5.1.0.1153 (December 2016)

    BioWin 5.1 was released in early October. The main feature of the new version is the game-changing speed improvement, for both steady state and dynamic simulations. We’ve had great feedback from many users. Soon after the release of BioWin 5.1 we issued a patch. That was mainly to correct an interaction between BioWin and the BW Controller that popped up under a certain set of conditions – something that had escaped us in testing.

    The speed improvement is an ongoing process. We are working on several fronts that will bring further speed benefits over the next [read more…]


    BioWin Patch : 4.1.1.1054 (May 2016)

    Please note that a patch for BioWin 4.1 has been recently released. The current release version of BioWin 4.1 is 4.1.1.1054. You can download that here.

    Also please note that BioWin 5.0 was released in February 2016. If you wish to upgrade BioWin 4.1 to BioWin 5.0, you may do that here.

     


    BioWin Patch : 5.0.0.1110 (May 2016)

    A BioWin 5 patch was recently released – all of our users who are unable to use BioWin’s auto-update feature should visit

    www.envirosim.com/upgrading-to-biowin-50

    to download. The most recent version of BioWin is 5.0.0.1110, which you can check in BioWin by selecting Help > About…