BioWin Patch : 5.3.0.1214 (December 2018)

BioWin Update

The patch released today (BioWin 5.3.0.1214) addresses the following issues :

  • Fixed an issue where custom air supply groups (used in energy cost calculations) were not saved.
  • Improved speed of simulation when controlling air flow via the BW Controller.
  • Updated cabinet configurations: IFAS Simplified and IFAS Detailed.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1213 (November 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1213) addresses the following issues :

  • Fixed an issue for files created in older versions of BioWin where an airflow constraint specified in a media bioreactor’s Operation tab may not be obeyed.
  • Updated cabinet configurations: MLE Process, 3 Stage Phoredox, and 3 Stage Phoredox with Primary Fermenter.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    EnviroSim 推出中文版BioWin 5.1


    EnviroSim in the WEFTEC 2018 Ontario Pavilion (Booth 907)

    EnviroSim Associates is pleased to be participating with other Ontario water companies in the Ontario Pavilion at WEFTEC 2018 (September 29 – October 3, 2018). The province of Ontario is home to 900 companies providing clean water solutions. EnviroSim has been based in Hamilton, Ontario for over 25 years and is looking forward to the continued growth of the water industry in the province.

    We are looking forward to seeing friends and colleagues at the Exhibition in a few weeks – drop by anytime to see us at Booth # 907!

    EnviroSim staff will be involved in the following activities:

    [read more…]


    BioWin Patch : 5.3.0.1212 (June 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1212) addresses the following issues :

  • Improved seeding in PST element.
  • Minor fix to buttons that reset diffuser parameters to default values.
  • Fix error when pasting the clipboard to a state variable vector in various dialogs.
  • Change in SOTE calculation when media occupies a very large percent of total volume.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    Kevan Brian – New EnviroSim Team Member

    EnviroSim is delighted to announce that Kevan Brian will be joining the team at our Ontario headquarters in August 2018. He comes to EnviroSim from his current role in consulting based out of Melbourne, Australia. Kevan is a long-term BioWin user and has 20 years’ experience as a wastewater treatment process engineer working in New Zealand, Australia, and in the UK. He brings a wealth of experience in BioWin modelling, calibration, treatment plant optimization and engineering consulting, as well as skills in business management.

    Join us in welcoming Kevan to the EnviroSim team, and feel free to contact him at [read more…]


    User Group Meeting : June 18, 2018 at Starhotels in Bologna, Italy

    EnviroSim will be participating in a User Group Meeting together with HR Wallingford and Innovyze on Monday June 18, 2018 at Starhotels in Bologna, Italy. There will be presentations on various topics from design to management of sewage systems, purifiers, aqueduct networks and waterways. Users will be presenting their experiences using InfoWorks and BioWin simulation applications. The User Group Meeting is free to attend but participants must register by sending an e-mail to italia@hrwallingford.com by June 13, 2018.

    Download Program Flyer


    BioWin Advantage 7.3 : Using Function Series in BioWin

    EnviroSim is pleased to announce the latest issue of “The BioWin Advantage” e-tech newsletter BioWin Advantage 7.3 : Using Function Series in BioWin.

    DOWNLOAD RELATED FILES DOWNLOAD PDF VERSION

     

    Introduction

    In this issue we describe a BioWin charting feature known as “function series”, explain the procedure for adding a function series to a chart, and demonstrate some useful ways to use function series in BioWin.

    Files


    EnviroSim at the IWA Biofilms: Granular Sludge Conference in Delft

    Gillian Burger, discussing EnviroSim’s poster on BioWin’s approach for modelling sequencing granular sludge tanks at the IWA Biofilms: Granular Sludge Conference from March 18-21, 2018 in Delft, The Netherlands.

    ESA Granular Sludge Poster for IWA GSC 2018


    Article in Influents Magazine

    Catch up on your winter reading…wastewater characterization article by Drs. Peter Dold and Chris Bye in the winter edition of Influents magazine.


    BioWin Advantage 7.2 : Introducing the Granular Sludge Sequencing Tank

    EnviroSim is pleased to announce the latest issue of “The BioWin Advantage” e-tech newsletter BioWin Advantage 7.2 : Introducing the Granular Sludge Sequencing Tank.

    DOWNLOAD RELATED FILES DOWNLOAD PDF VERSION

    Files :


    BioWin Patch : 5.3.0.1211 (March 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1211) addresses the following issues :

  • Steady state tables in the Album only update during simulation when “Steady state simulation table updates” is checked in Customize.
  • Spanish, Japanese, and Chinese language support added.
  • Updated several BW Controller examples to simulate quicker.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Advantage 7.1 : Illustrating pH Modeling in BioWin - Titrations of Acids and Bases

    EnviroSim is pleased to announce the latest issue of “The BioWin Advantage” e-tech newsletter. This release discusses Illustrating pH Modeling in BioWin – Titrations of Acids and Bases.

    DOWNLOAD RELATED FILES

    Illustrating pH Modeling in BioWin – Titrations of Acids and Bases

    Files :

    Introduction

    pH is an important factor in simulating the performance of biological wastewater [read more…]


    BioWin Patch : 5.3.0.1210 (January 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1210) addresses the following issues :

  • Increased precision for switching interval in Flow Router specification.
  • Maximum/minimum air flow rate can be set in GSST element.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.3.0.1209 (January 2018)

    BioWin Update

    The patch released today (BioWin 5.3.0.1209) addresses the following issues :

  • The default values on the GSST Granules tab for granule settled volume and voidage have been modified slightly.
  • When a new GSST element is added to the drawing board, it uses the global default parameters as the basis for its local parameters rather than the current global project parameters.
  • You can update using the automatic updater or by downloading the latest version here : BioWin Update


    EnviroSim Releases BioWin 5.3

    The EnviroSim team is pleased to announce the release of BioWin 5.3.

    BioWin 5.3 contains a new Granular Sludge Sequencing Tank element to model this process, which is gaining acceptance worldwide as an effective wastewater treatment technology. BioWin 5.3 also contains an enhancement to the trickling filter element and refinements to model parameters.

    [read more…]


    EnviroSim in the WEFTEC Ontario Pavilion (Booth 7755)

    EnviroSim Associates is pleased to be participating with other Ontario water companies in the Ontario Pavilion at WEFTEC 2017 (Oct 2-4, 2013). The province of Ontario is home to 900 companies providing clean water solutions. EnviroSim has been based in Hamilton, Ontario for over 25 years and is looking forward to the continued growth of the water industry in the province.

    Please come see these presentations, and visit us in Booth 7755 in the North Building of McCormick Place. See you in Chicago!

    [read more…]


    BioWin Advantage 6.1 : Using BioWin’s Model Builder Functionality

    EnviroSim is pleased to announce the latest issue of “The BioWin Advantage” e-tech newsletter. This release discusses Using BioWin’s Model Builder Functionality

    DOWNLOAD RELATED FILES Using BioWin’s Model Builder Functionality

    In this issue we will explore the use of BioWin’s Model Builder functionality. This powerful feature can be used to write extensions to BioWin’s core model (on a global or local basis), or to write standalone models to replace those of BioWin if so desired.

    BioWin Files :


    BioWin Patch : 5.2.0.1163 and PetWin Patch : 5.2.0.606 (June 2017)

    The patches released today (BioWin 5.2.0.1163 and PetWin 5.2.0.606) address the following issues :

  • Percent capture of ISS in Grit tank element correctly updates on exiting dialog.
  • Adjusted scaling of two-sided hydraulic loading factor switch in Trickling filter element.
  • Improved accounting of power used by Brush/Surface aerator elements in total power calculation.
  • Adjusted parameter used in calculation of mixed liquor density. [Project | Parameters | Physical/Chemical][A in ML Density = H2O density + A*MLSS]
  • You can update using the automatic updater or by downloading the latest versions here :


    EnviroSim Releases PetWin 5.2

    PetWin

    The EnviroSim team is pleased to announce the release of PetWin 5.2.

    PetWin 5.2 contains many exciting new updates that build upon the energy and operating cost features first introduced in BioWin 5.0, further expanding its capability as a plant management tool, and for comparing design alternatives.

    [read more…]


    BioWin Patch : 5.2.0.1162 (April 2017)

    The patch released today (BioWin 5.2.0.1162) fixes an issue related to volume limits in equalization tank elements, and improves DO / airflow modeling in trickling filter elements.

    You can update using the automatic updater or by downloading the latest version here : BioWin Update


    BioWin Patch : 5.2.0.1159 (March 2017)

    The patch released today (BioWin 5.2.0.1159) fixes an error when editing old style PST elements, and fixes incorrect units for volumetric cost in sludge element. You can update using BioWin’s automatic updater or by downloading the latest version here.

    You can update using the automatic updater or by downloading the latest version here : BioWin Update

     

     


    BioWin Patch : 5.2.0.1157 (February 2017)

    A small issue where a portion of the Operation tab of the Ideal Primary Settling Tank was not displaying properly has been fixed by a patch released today (BioWin 5.2.0.1157).

    You can update using the automatic updater or by downloading the latest version here : BioWin Update


    EnviroSim Releases BioWin 5.2

    Download BioWin 5.2

    The EnviroSim team is pleased to announce the release of BioWin 5.2.

    BioWin 5.2 contains many exciting new updates that build upon the energy and operating cost features first introduced in BioWin 5.0, further expanding its capability as a plant management tool, and for comparing design alternatives.

    [read more…]


    EnviroSim 推出中文版BioWin 5.1

    EnviroSim 最 新 推 出 BioWin 5.1 的 中 文 版 ,用 户 可 在 以 下 链 接 进 行 下 载 www.envirosim.com/CHS/bw51setup.exe,安 装 之 后,将 Window 系 统 语 言 设 置 为 中 文 即 可 使 用 最 新 的 中 文 版 BioWin。

    最 新 的 中 文 版 在 功 能 上 与 英 文 版 一 致 , 相 对 老 版 本 新 增 的 功 能 请 参 考 《 BioWin 5.1 的 新 进 展 》 , 同 时 对 老 版 本 的 中 文 专 业 用 [read more…]